Peecker Sound PSUT8AE

Loudspeaker systems | UPTURNED T series

Wide-dispersion Sound Column Additional Element



尖沙咀 九龍區旗艦店
九龍尖沙咀
金馬倫里1-9號
(852) 2762 6900

灣仔 港島區旗艦店
香港灣仔告士打道
144-149號城市大廈
(852) 2519 0238

沙田 新界區旗艦店
沙田HomeSquare 3樓, 303舖
(852) 2602 3829

概覽

詳情

The PSUT8AE unit (Additional Element) is designed to be positioned between the base (the amplified subwoofer, see below) and the top element to create acoustic continuity between the two elements. It has the same power handling capacity as the top unit (400 W RMS), but it has a shorter throw while, at the same time, a wider horizontal opening. Using this element increases the availability of the mid-low frequencies and is essential for voice and solo instrument reproduction. It is important to note that this speaker has a plug-in connector also in the upper part, enabling the connection of additional speakers (up to four), all without the need for a power cable or external signal. 
Summarizing months of research in just a few lines, we can affirm that the real "supporting evidence" for the two column speakers described above, besides the well-known properties of a very long array, is the exceptional horizontal dispersion - a full 150°. This is achieved thanks to the special mixed arrangement of the various transducers (multi-angular loudspeaker design), a solution devised by the Sound Corporation R&D department following measurements and simulations carried out with dedicated predictive software applications.

  • Horizontal directivity of 150° (-6 dB); 
  • Modular structure with direct plug-in connections (no external power cables);
  • Digital amplifier with DSP (24-bit/96 kHz) integrated in the active subwoofer; 
  • Neodymium components;
  • Extreme portability with customized bags;
  • Ergonomic design;
  • Birch plywood cabinet with weatherproofing treatment;
  • Peecker Sound TQM.

Specifications

Power handling RMS 400 W
Frequency response (-6 dB) 140÷18k Hz
Peak SPL (@1m / @16m) 128 dB / 105 dB
Horizontal coverage angle (-6 dB) 150°
Vertical coverage angle (-6 dB) 15°
Nominal impedance 16 Ohm
Transducers 8x4" full range - neodymium magnet
Cabinet birch plywood
 Colour black or white
 Input connectors direct connection to another UT element
Dimensions (WxHxD) 15x98x23 cm
Net weight 10 kg 

Accessories

STD-WUT8 Wall bracket for vertical support of 1 or 2 (1 PSUT8AE + 1 PSUT8TE) sound columns
STD-WUT1 Wall bracket for vertical support of 1 or 2 PSUT1 speakers (180° Hor. and Vert. rotation)
STD-PSUT124 Flying bracket for 2 or 4 PSUT1 speakers (side-by-side or stacked) 
STD-PSUTS Flying bracket for one PSUTS subwoofer
  PS-ST125 Adjustable-height stand holder for one PSUT8TE sound column
PSUT8-AC Jumper-SpeakOn converter and adapter flange for PSUT8TE to PS-ST125 stand
  PSUT8-ST70 Stand holder for spacing a PSUT8TE speaker from a PSUTBASE/A sub (ht. 70 cm)
  PSUT1-ST110 Stand holder for spacing one (or two) PSUT1 speakers from a PSUTS sub (ht. 110 cm)
  TRA-PSUT1 30W (16 Ohm)/100V line transformer for the connection of a PSUT1 speaker to 100V constant voltage lines
  TRA-PSUTS 150W (8 Ohm)/100V line transformer for the connection of a PSUTS subwoofer to 100V constant voltage lines
  UT8-COVER Protection enclosure for one PSUT8TE or PSUT8AE sound column
 

UT8ST70-COVER

Protection enclosure for one PSUT8-ST70 stand holder

 

UTBASE/A-COVER

Protection enclosure for one PSUTBASE/A subwoofer