K&M 219 Thread Adapter-PLATED
Parts No: 21900-000-29 3/8" female thread, 1/2" male thread.SpecificationsFemale Thread: 3/8”Male Thread: 1/2”Special Features: With Knurled Surfac...
檢視完整細節Parts No: 21900-000-29 3/8" female thread, 1/2" male thread.SpecificationsFemale Thread: 3/8”Male Thread: 1/2”Special Features: With Knurled Surfac...
檢視完整細節Parts No: 21421-000-00 Designed to carry 2 K&M microphone stands. Made of waterproof nylon. Black with screenprinted logo. Two inside compar...
檢視完整細節Parts No: 24281-000-55 Attachable to speakers. Slip-on adapter for speaker stands with tube-diameter 35 mm. With 2 drill holes diam. 11 mm at inter...
檢視完整細節Parts No: 23266-300-74 Unique and small table mic stand with compact base. With anti-vibration felt insert for noise filtration. 3/8" thread.Specif...
檢視完整細節Parts No: 27195-300-55 Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with extend...
檢視完整細節Parts No: 49123-073-55 Utility drawer with keylock, 390 mm deep. Heavy-duty slides and steel construction. 3 spaces.SpecificationsHeight (units): 3...
檢視完整細節Parts No: 48260-016-55 Sturdy steel 19" rack with rack rails on the front and back side. Sloped front. 16 spaces, 425 mm deep at the top, H: 840 mm...
檢視完整細節Parts No: 23855-000-55 Suitable for microphone arm 23850 and 23860.SpecificationsBase Diameter: 73 mmBore Holes: Diameter 5.2 mm (3 x)Function: Scr...
檢視完整細節Parts No: 23150-300-55 The telescopic microphone stand with a 3/8" threaded connector is extremely versatile. Its height can be adjusted from 230 t...
檢視完整細節Parts No: 26085-300-55 With the unique »Soft-Touch« one-hand clutch the height can be adjusted with a quick squeeze to easily raise and lower the m...
檢視完整細節Parts No: 49302-012-55 Ideal for headphones, cables or other technical equipment. The stable headphone holder swivels and can be turned away to sav...
檢視完整細節Parts No: 23720-300-55 The new table clamp with a 3/8" threaded connector is a true all-rounder. The threaded bolt can be fixed in four different d...
檢視完整細節Parts No: 21339-000-55 Same as 21338, but with thread bolt M20 for connector plate 24116 for zero backlash and absolute vertical position.Specifica...
檢視完整細節Parts No: 23040-000-55 3 pole plug NC3MX XLR terminating in a 3 pole bushing with NC3FX XLR spring bushing.SpecificationsDiameter: 15 mmLength: 400...
檢視完整細節Parts No: 29375-000-55 Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free swi...
檢視完整細節Parts No: 28075-000-55 Heavy duty stand for amplifiers and mixers. Foldable. Spring-loaded locking bolt and locking screw. Felt-lined supporting br...
檢視完整細節Parts No: 24010-314-55 The large Popkiller for modern studio engineering. The large 200 mm nylon screen guarantees optimum sound filtering during s...
檢視完整細節Parts No: 24611-000-00 To store and transport two lighting/speaker stands 246/1. Sturdy nylon fabric, water-resistant. Two inside compartments and ...
檢視完整細節Parts No: 20000-300-55 Specially designed folding die-cast base with built-in anti-vibration filters in legs. Stand isolates microphone from vibrat...
檢視完整細節Parts No: 26795-000-56 Steel stand for monitors with a stable, elegant 480 x 480 mm cast base. This stand has an oversized rod combination and a...
檢視完整細節Parts No: 23325-300-55 Short stand with small cast iron base. Well suited for microphoning amps, percussion, etc. The circular rubber insert ring f...
檢視完整細節Parts No: 21336-000-55 Connecting rod for satellite systems. With spring-loaded locking screw and safety bolt. Steel tubing.SpecificationsHeight: F...
檢視完整細節Parts No: 21460-009-55 Worldwide accepted: the speaker stand 214/6 ‒ robust and sturdy. All clamps are high quality zinc die-cast. The leg construc...
檢視完整細節Parts No: 23600-300-55 Connects to top of mic stands for holding 4 microphones or boom arms. 3/8" locking screws.SpecificationsLength: 200 mmMateri...
檢視完整細節