M-Audio BX5 D3 - 5" Powered Studio Reference Monitor (Single unit)
BY
M-AUDIO
PRODUCT CODE: M38-BX5D3
Suggested Retail Price
$1,200.00
$799.00
Why You Need a Monitor
A studio monitor is no ordinary loudspeaker. Unlike a conventional speaker, a true monitor must be unerringly accurate, with a flat frequency response and vanishingly low distortion. It has to tell you, the music producer— dependably and unquestionably—exactly what is or is not in your recording. In a studio-grade monitor speaker, there is no place for the usual list of speaker colorations and limitations prevalent in conventional loudspeakers. Response peaks\dips, uneven polar response, high THD, nasal midrange, bloated mid-bass, and crossover-induced phase incoherence do nothing but undermine the confidence demanded for superior mix performance.
Key Features
- Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
- 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
- 1” natural silk dome tweeter delivers superb transient details
- New computer-optimized tweeter waveguide for precise imaging
- Acoustic Space Control to fine-tune low-end response to your room
- Optimized rear port for extended low-frequency response
- XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
- Volume control enables you to dial in the perfect monitor playback level
- Ultra-wide range 52-35kHz frequency response covers full musical spectrum
- Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Specification
| TYPE | 2-way near-field studio reference monitors |
| LOW FREQ. DRIVER | 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded |
| HIGH FREQ. DRIVER | 1 inch (25mm) magnetically shielded natural silk dome |
| FREQUENCY RESPONSE | 52 Hz – 35 kHz |
| CROSSOVER FREQUENCY | 2.5kHz |
| LOW FREQ. AMPLIFIER POWER | 60W |
| HIGH FREQ. AMPLIFIER POWER | 40W |
| MAXIMUM PEAK SPL | 110 dB SPL - Full Bandwidth Pink Noise Measured |
| INPUT SENSITIVITY | -10dBU |
| INPUT CONNECTORS | 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector |
| INPUT IMPEDANCE | 10kΩ balanced, 20kΩ unbalanced |
| POLARITY | Positive signal at + input produce outward LF cone displacement |
| PROTECTION | RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse |
| POWER | Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W |
| FUSE | 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V |
| CABINET | Vinyl-laminated high-acoustic-efficiency MDF |
| DIMENSIONS(WIDTH X DEPTH X HEIGHT) | 6.9” x 7.8” x 10” / 176 x 197 x 254 mm |
| WEIGHT | 12.3 lbs, 5.6kg |
